What You Need to Know About Outdoor Wood Burners
Outdoor wood burners are an affordable method of heating homes and businesses. They also reduce the need for nonrenewable fossils fuels and help in implementing a sustainable energy strategy.
Well-seasoned wood is essential for efficient burning. Wood that is not seasoned or green has higher moisture content and may cause creosote that can reduce performance.
Efficient
Outdoor wood burners have been around for many years. They are an energy-efficient and green method to heat your home. However, the typical design of OWBs, which promotes a slow, cooler fire which results in less combustion and a higher amount of smoke, creosote, and particulates. These unburned fuels could cause health problems as well as fire hazards and deteriorate the surrounding environment.
Additionally freestanding wood burner of smoke produced by OWBs can make neighbors angry and result in DEC (Department of Environmental Conservation) enforcement actions. This type of issue can have a negative impact on the value of your property, and may lead to your OWB being shut down.
Crown Royal Stoves offers a line of EPA Certified outdoor wood furnaces called the Pristine Gasification Series that utilizes technology to increase the efficiency of combustion for a clean, smokeless burning. large wood burner is accomplished by using the negative pressure air system that draws fresh, dry, hot and filtered air from the bottom of the boiler and pushes it out through the chimney at a much more rapid rate than traditional outdoor wood boilers. This is achieved through an innovative design that makes use of a multi-pass, water filled heat exchanger constructed from 409 Titanium Enhanced Stainless Steel.
If properly utilized when properly used, When properly used, large wood burning stove achieves an efficiency of 99% for a smoke-free and cleaner fire. It requires less wood, and produces a lot less emission than traditional OWBs. To further maximize the effectiveness of your OWB, it is important to burn clean, seasoned, dry wood. The process of preparing your wood for 6 months or a year prior to burning is recommended. It helps ensure a better, more energy efficient burn.
You can boost the efficiency of your wood-burning stove by performing each week a "dry burn". This method lowers the amount of creosote in your home, increases boiler efficiency and extends the life of your boiler. Lastly, by adding a creosote removal stick each time you fill your stove, you can significantly reduce the amount creosote used. This product is available at Wisconsin Wood Furnace.
Clean
A wood-burning stove could be extremely dirty due to burned soot particles. They are extremely difficult to shift If you notice any areas of build up on the glass of your stove, you must clean them as soon as you notice them. Any soot that is not eliminated will harden, making it even more difficult to remove. It is crucial to select the right cleaners however, you should avoid damaging the glass surface with anything that may scratch it. This could result in a weak spot that will shatter the glass when it's exposed to high temperatures.
Make sure you let your wood burner cool completely before cleaning it. Also, ensure that the area around it is covered with newspaper. This will prevent the ash from spreading and staining surfaces.
Based on the quality of the wood that you use, it can take up to an entire year for your stove to become properly well-seasoned. The wood that is seasoned will not only burn more efficiently and will produce less creosote. This is the substance that accumulates on your chimney, reducing effectiveness and creating a fire hazard. If you're using unseasoned wood or just making a fresh fire in your outdoor wood burner the best thing to do is to open the back door to the lower part and scoop out the ashes into a non-combustible bin every week.
A sediment flush should be carried out on your boiler every four years. This is a simple five second flush from the drain valve on your boiler. This will get rid of any sediments that have built up in the system, and ensure that your boiler is operating efficiently.
After you have cleaned the exterior of your fireplace that is outside it is time to clean it. Before you begin, it's crucial to cover the floor area around the stove with newspaper. It is also beneficial to wear gloves and protective eyewear. Also, you should have an shovel, a metal container for ash and scraping tools. You can use a cloth for an insulator to protect the refractory as you remove ash and coal deposits.
Easy to operate
Despite their popularity (they were among the 1990s' "it" trends, along with mullet haircuts) outdoor wood boilers, also known as outdoor furnaces or outdoor wood hydronic heaters, are frequently misunderstood. In contrast to their EPA-approved counterparts, popular wood stoves that are designed to burn at low, constant temperatures, these boilers have an increased fire rate and emit more smoke when operating. Certain local governments restrict or ban their use.
OWBs are best suited to homes with high levels of insulation. The smoldering, visible smoke can also be a source of complaints from neighbors and has led to many OWBs being shut-down or being sued in the past. For OWBs dry wood that has a lower moisture content is needed to function effectively. Green or unseasoned wood will reduce efficiency, causing creosote to build up and reduce the life of the burner. Drying wood takes time, and a moisture meter is a must for any homeowner.
Dual-stage wood gasification (OWGB) boilers however utilize a three-step process which makes use of the energy available in the wood. This results in less smoke. These types of furnaces are much more efficient than conventional OWBs and can be used with a larger variety of fuel. Wood gasification boilers need dry, seasoned wood. The majority of wood will mature in a year. Oak and other tough trees can take as long as two years. They are less watery and have a greater density. This enables them to hold heat longer, thus increasing efficiency and reduce pollution. The EPA's "Burn Wise" website and Cornell Cooperative Extension can help homeowners learn more about how to burn wood efficiently in order to reduce pollution to the air.
Low Maintenance
Modern outdoor wood stoves have been designed to be eco-friendly. Modern outdoor wood furnaces don't produce excessive heat or CO2. They also burn cleaner than indoor wood stoves. They also require less wood to generate the same amount of heat as traditional stoves.
Outdoor wood burners require less maintenance than indoor wood burners and are more accommodating when it comes to the moisture content of the wood. However outdoor wood burners should only be used with properly treated or "cured" wood. Certain types of wood may last for up to a year. It is crucial to use a moisture meter to measure the amount of water of your wood before loading.
During operation it is important to examine the system on a regular basis for the accumulation of creosote. Creosote, which is a byproduct of combustion, can build up in the chimney and flue if they aren't cleaned regularly. It can be removed by pouring a creosote removing product into the fire. Regular cleaning of the chimney and flue will help eliminate dangerous creosote accumulations and improve efficiency.
Crown Royal Stoves developed a new airflow technique called Negative Pressure Gasification to ensure 99% efficiency in combustion. This technology is employed in our EPA certified Pristine Series Outdoor Wood Furnaces to draw air upwards from the bottom and push all gases through an sealed secondary combustion chamber, surrounded by water with easy-to-clean Turbulators. The result is a smokeless and pollutant free burning.